No teachers found matching your search. Please try another name.

Prof. Dr. Md. Mizanur Rahman, CEng
Professor
Rheological properties of kaolin/PolyetherSulfone (PESf) used in hollow fiber fabrication: Effects of content ratio.
Misaran, M.S., Sarbatly, R. and Rahman, M.M., 2014. Rheological properties of kaolin/PolyetherSulfone (PESf) used in hollow fiber fabrication: Effects of content ratio. Applied Mechanics and Materials, 660, pp.244-248.
Research output : Contribution to journal › Article › peer-review
Experimental study the effects of water pressure and turbine blade lengths & numbers on the model free vortex power generation system.
Rahman, M., Hong, T.J., Tang, R., Sung, L.L. and Tamiri, F.B.M., 2016. Experimental study the effects of water pressure and turbine blade lengths & numbers on the model free vortex power generation system. International Journal of Current Trends in Engineering & Research (IJCTER), 2(9), pp.13-17.
Research output : Contribution to journal › Article › peer-review
A passive cooling system of residential and commercial buildings in summer or hot season.
Rahman, M.M., Mashud, Mohammad., Chu, C.M., Bin Misaran, M.S., Sarker, M. and Kumaresen, S., 2015, November. A passive cooling system of residential and commercial buildings in summer or hot season. In IOP Conference Series: Materials Science and Engineering (Vol. 100, No. 1, p. 012031). IOP Publishing.
Research output : Contribution to conference › Article › peer-review
CFD Simulation and Experimental Data for a Fixed Heat Load Natural Draft Air-Cooled Heat Exchanger With Cold Inflow Mitigation.
Chu, C.C., Rahman, M.M. and Kumaresan, S., 2015, June. CFD Simulation and Experimental Data for a Fixed Heat Load Natural Draft Air-Cooled Heat Exchanger With Cold Inflow Mitigation. In ASME Power Conference (Vol. 56604, p. V001T12A001). American Society of Mechanical Engineers.
Research output : Contribution to conference › Article › peer-review
Preliminary study of seaweed drying under a shade and in a natural draft solar dryer.
Phang, H.K., Chu, C.M., Kumaresan, S., Rahman, M.M. and Yasir, S.M., 2015. Preliminary study of seaweed drying under a shade and in a natural draft solar dryer. International Journal of Science and Engineering, 8(1), pp.10-14.
Research output : Contribution to journal › Article › peer-review
Preliminary data of evaporation characteristics for an open pond in East Malaysia.
Md. Ashikur Rahman, M.A.R., Md. Mizanur Rahman, M.M.R., Noor Ajian, M.L. and Chu ChiMing, C.C., 2015. Preliminary data of evaporation characteristics for an open pond in East Malaysia.
Research output : Contribution to journal › Article › peer-review
Experimental Stud to Determine the Effect of ire Mesh Pore Size on Natural Draft Chimne Performance.
Rahman, M.M., Ming, C.C. and Misaran, M.S.B., Experimental Stud to Determine the Effect of ire Mesh Pore Size on Natural Draft Chimne Performance.
Research output : Contribution to conference › Abstract › peer-review
Evaluate Performance of Earth–Air–Pipe System under Laboratory Condition.
Rahman, M.M., Sung, L.L., Tamiri, F.M. and Misaran, M.S.B., Evaluate Performance of Earth–Air–Pipe System under Laboratory Condition.
Research output : Contribution to conference › Article › peer-review
Heat Balance of a Simulated Natural Convection Vertical Cylinder with Inlet Constriction and Flow Reversal at Chimney Exit.
Chu, C.M., Rahman, M.M., Kumaresan, S. and Phang, H.K., 2014, August. Heat Balance of a Simulated Natural Convection Vertical Cylinder with Inlet Constriction and Flow Reversal at Chimney Exit. In Proceedings of the International Conference on Heat Transfer and Fluid Flow (pp. 11-12).
Research output : Contribution to conference › Article › peer-review
Development of Mixed Vertical Axis Wind Turbine (MVAWT) for Low Wind Condition
Chua, B.L., Misaran, M.S., Farm, Y.Y., Rahman, M. and Barahim, B.E., 2014. Development of Mixed Vertical Axis Wind Turbine (MVAWT) for Low Wind Condition. Applied Mechanics and Materials, 660, pp.811-815.
Research output : Contribution to journal › Article › peer-review
Improved thermal energy discharge rate from a temperature-controlled heating source in a natural draft chimney.
Chu, C.M., Rahman, M.M. and Kumaresan, S., 2016. Improved thermal energy discharge rate from a temperature-controlled heating source in a natural draft chimney. Applied Thermal Engineering, 98, pp.991-1002.
Research output : Contribution to journal › Article › peer-review
Evaluation of the modified chimney performance to replace mechanical ventilation system for livestock housing.
Rahman, M., Chu, C.M., Kumaresen, S., Yan, F.Y., Kim, P.H., Mashud, M. and Rahman, M.S., 2014. Evaluation of the modified chimney performance to replace mechanical ventilation system for livestock housing. Procedia Engineering, 90, pp.245-248.
Research output : Contribution to journal › Article › peer-review
A chimney of low height to diameter ratio for solar crops dryer
Kumaresan, S., Rahman, M.M., Chu, C.M. and Phang, H.K., 2013. A chimney of low height to diameter ratio for solar crops dryer. In Developments in Sustainable Chemical and Bioprocess Technology (pp. 145-150). Boston, MA: Springer US.
Research output : Contribution to journal › Article › peer-review
Effect of cold inflow on chimney height of natural draft cooling towers
Chu, C.M., Rahman, M.M. and Kumaresan, S., 2012. Effect of cold inflow on chimney height of natural draft cooling towers. Nuclear Engineering and Design, 249, pp.125-131.
Research output : Contribution to journal › Article › peer-review
Experimental study of cold inflow and its effect on draft of a chimney.
Chu, C.C.M., Chu, R.K.H. and Rahman, M.M., 2012. Experimental study of cold inflow and its effect on draft of a chimney. Advanced Computational Methods and Experiments in Heat Transfer XII, WIT Transactions on Engineering Sciences, 75, pp.73-82.
Research output : Contribution to chapter › Article › peer-review
Evaluation of a Passive Direct Greenhouse Solar Dryer under Varying Load Conditions
Rahman, A., Misaran, M.S., Ming, C.C., Mansa, R.F., Jin, T.H., Radzali, M.A., Ibrahim, M.K.W. and Rahman, M.M., 2026. Evaluation of a Passive Direct Greenhouse Solar Dryer under Varying Load Conditions. International Journal of Integrated Engineering, 18(2), pp.167-181.
Research output : Contribution to journal › Article › peer-review
Temperature profile data in the zone of flow establishment above a model air-cooled heat exchanger with 0.56 m2 face area operating under natural convection
Rahman, M. M., Kumaresan, S. and Chi Ming, C., 2010. Temperature profile data in the zone of flow establishment above a model air-cooled heat exchanger with 0.56 m2 face area operating under natural convection. Journal of Applied Sciences, 10(21), pp.2673-2677.
Research output : Contribution to journal › Article › peer-review
A Method to Achieve Robust Aerodynamics and Enhancement of Updraft in Natural Draft Dry Cooling Towers
Chu, C.C. and Rahman, M.M., 2009, January. A method to achieve robust aerodynamics and enhancement of updraft in natural draft dry cooling towers. In Heat Transfer Summer Conference (Vol. 43581, pp. 817-823).
Research output : Contribution to conference › Article › peer-review
A study on improved biomass briquetting
Bhattacharya, S.C., Leon, M.A. and Rahman, M.M., 2002. A study on improved biomass briquetting. Energy for sustainable development, 6(2), pp.67-71.
Research output : Contribution to journal › Article › peer-review
Working parameters affecting earth-air heat exchanger (EAHE) system performance for passive cooling: A review.
Darius, D., Misaran, M.S., Rahman, M.M., Ismail, M.A. and Amaludin, A., 2017, July. Working parameters affecting earth-air heat exchanger (EAHE) system performance for passive cooling: A review. In IOP conference series: materials science and engineering (Vol. 217, No. 1, p. 012021). IOP Publishing.
Research output : Contribution to conference › Article › peer-review
A Cold-inflow free solar chimney dryer for seaweed drying in Sabah, Malaysia
Rahman, M.M., Phang, H.K., Chu, C.M., Kumaresan, S. and Yasir, S.M., 2018, March. A Cold-inflow free solar chimney dryer for seaweed drying in Sabah, Malaysia. In Proceedings of the International Conference on Industrial Engineering and Operations Management (pp. 3062-3070).
Research output : Contribution to conference › Article › peer-review
Effects of inlet flow rate and penstock’s geometry on the performance of Gravitational Water Vortex Power Plant
Rahman, M.M., Hong, T.J. and Tamiri, F.M., 2018, March. Effects of inlet flow rate and penstock’s geometry on the performance of Gravitational Water Vortex Power Plant. In Proc. Int. Conf. Ind. Eng. Oper. Manag (Vol. 2018, pp. 2968-2976).
Research output : Contribution to conference › Article › peer-review
Estimate the Ventilation Effect from Wire Mesh Screen Assisted Solar Chimney
Rahman, M.M., Misaran, M.S.B., Jamanun, M.J.B. and Jawad, A., 2018. Estimate the ventilation effect from wire mesh screen assisted solar chimney. Journal of Energy and Power Engineering, 12, pp.127-131.
Research output : Contribution to journal › Article › peer-review
Anaerobic digestion of food waste.
Rahman, M.M., Lee, Y.S., Tamiri, F.M. and Hong, M.G.J., 2018. Anaerobic digestion of food waste. In Anaerobic Digestion Processes: Applications and Effluent Treatment (pp. 105-122). Singapore: Springer Singapore.
Research output : Contribution to chapter › Chapter › peer-review
Study the thermal effect on low cost lithium ions battery.
Rahman, M.M., Jamanun, M.J.B., Choong, A.T.K. and Hong, M.G.J., 2018. Study the thermal effect on low cost lithium ions battery. International Journal of Applied Engineering Research, 13(11), pp.9154-9158.
Research output : Contribution to journal › Article › peer-review
Industrial revolution 4.0: Universiti Malaysia Sabah
Mudin, D.K.D., How, S.E., Rahman, M.M., Ibrahim, P. and Jopony, M., 2018, August. Industrial revolution 4.0: Universiti Malaysia Sabah perspective. In E3S Web of Conferences (Vol. 48, p. 03005). EDP Sciences.
Research output : Contribution to conference › Article › peer-review
Electromagnetic wave absorption properties of rice husks carbonized at 2500° C
Melvin, G.J.H., Wang, Z., Ni, Q.Q., Siambun, N.J. and Rahman, M.M., 2017, December. Electromagnetic wave absorption properties of rice husks carbonized at 2500° C. In AIP Conference Proceedings (Vol. 1901, No. 1, p. 020002). AIP Publishing LLC.
Research output : Contribution to conference › Article › peer-review
Fabrication and characterization of carbonized rice husk/barium titanate nanocomposites.
Melvin, G.J.H., Wang, Z., Ni, Q.Q., Siambun, N.J. and Rahman, M.M., 2017, September. Fabrication and characterization of carbonized rice husk/barium titanate nanocomposites. In IOP Conference Series: Materials Science and Engineering (Vol. 229, No. 1, p. 012024). IOP Publishing.
Research output : Contribution to conference › Article › peer-review
Simulation of Effective Plume-Chimney Above Natural Draft Air-Cooled Heat Exchangers
Chu, C.C.M., Tie, R.H.Y. and Rahman, M.M., 2017, June. Simulation of Effective Plume-Chimney Above Natural Draft Air-Cooled Heat Exchangers. In ASME Power Conference (Vol. 57618, p. V002T13A009). American Society of Mechanical Engineers.
Research output : Contribution to conference › Paper › peer-review
Carbon materials derived from rice husks at low and high temperatures.
Melvin, G.J.H., Wang, Z., Siambun, N.J. and Rahman, M.M., 2017, July. Carbon materials derived from rice husks at low and high temperatures. In IOP Conference Series: Materials Science and Engineering (Vol. 217, No. 1, p. 012017). IOP Publishing.
Research output : Contribution to conference › Article › peer-review
Experimental design and analysis of pump as turbine for micro hydro system.
Ismail, M.A., Muzammil, W.K., Rahman, M., Ibrahim, M.W.K. and Misran, S., 2017, July. Experimental design and analysis of pump as turbine for micro hydro system. In IOP Conference series: materials science and engineering (Vol. 217, No. 1, p. 012014). IOP Publishing.
Research output : Contribution to conference › Article › peer-review
Performance investigation of a mix wind turbine using A clutch mechanism at low wind speed condition.
Jamanun, M.J., Misaran, M.S., Rahman, M. and Muzammil, W.K., 2017, July. Performance investigation of a mix wind turbine using A clutch mechanism at low wind speed condition. In IOP Conference Series: Materials Science and Engineering (Vol. 217, No. 1, p. 012020). IOP Publishing.
Research output : Contribution to conference › Article › peer-review
Assessment of C-type Darrieus wind turbine under low wind speed condition.
Misaran, M.S., Rahman, M.M., Muzammil, W.K. and Ismail, M.A., 2017, July. Assessment of C-type Darrieus wind turbine under low wind speed condition. In IOP Conference Series: Materials Science and Engineering (Vol. 217, No. 1, p. 012019). IOP Publishing.
Research output : Contribution to conference › Article › peer-review
Experimentally identify the effective plume chimney over a natural draft chimney model.
Rahman, M.M., Chu, C.M., Tahir, A.M., Ismail, M.B., Misran, M.B. and Ling, L.S., 2017, July. Experimentally identify the effective plume chimney over a natural draft chimney model. In IOP Conference Series: Materials Science and Engineering (Vol. 217, No. 1, p. 012002). IOP Publishing.
Research output : Contribution to conference › Article › peer-review
The effects of opening areas on solar chimney performance.
Ling, L.S., Rahman, M.M., Chu, C.M., Misaran, M.B. and Tamiri, F.M., 2017, July. The effects of opening areas on solar chimney performance. In IOP Conference Series: Materials Science and Engineering (Vol. 217, No. 1, p. 012001). IOP Publishing.
Research output : Contribution to conference › Article › peer-review
A review on the development of gravitational water vortex power plant as alternative renewable energy resources.
Rahman, M.M., Tan, J.H., Fadzlita, M.T. and Wan Khairul Muzammil, A.R., 2017, July. A review on the development of gravitational water vortex power plant as alternative renewable energy resources. In IOP Conference Series: Materials Science and Engineering (Vol. 217, No. 1, p. 012007). IOP Publishing.
Research output : Contribution to conference › Article › peer-review
Effect of extrusion rate on morphology of Kaolin/PolyEtherSulfone (PESf) membrane precursor
Misaran, M.S., Sarbatly, R., Bono, A. and Rahman, M.M., 2016, November. Effect of extrusion rate on morphology of Kaolin/PolyEtherSulfone (PESf) membrane precursor. In IOP Conference Series: Materials Science and Engineering (Vol. 160, No. 1, p. 012013). IOP Publishing.
Research output : Contribution to conference › Article › peer-review
Effects of Physical Geometry on Solar Chimney Performance
Jawad, A., Suffian bin Misran, M., Shaikat, A.S., Tarek Ur Rahman Erin, M. and Rahman, M.M., 2021. Effects of Physical Geometry on Solar Chimney Performance. In Cold Inflow-Free Solar Chimney: Design and Applications (pp. 53-74). Singapore: Springer Singapore.
Research output : Contribution to chapter › Chapter › peer-review
Advanced technology in textiles: fibre to apparel.
Rahman, M.M., Mashud, M. and Rahman, M.M. eds., 2023. Advanced technology in textiles: fibre to apparel. Springer Nature.
Research output : Contribution to book › Editorial › peer-review
Effect of temperature and solar panel position on solar PV system performance: a review.
Shahria, S., Ullah, M.H., Mashud, M., Mokther, A.H., Hoq, E. and Rahman, M.M., 2022. Effect of temperature and solar panel position on solar PV system performance: a review. Energy and Thermofluids Engineering, 2, pp.39-48.
Research output : Contribution to journal › Review › peer-review
Design of a smart biofloc monitoring and controlling system using IoT
Tasnim, R., Shaikat, A.S., Al Amin, A., Hussein, M.R. and Rahman, M.M., 2022. Design of a smart biofloc monitoring and controlling system using IoT. Journal of Engineering Advancements, 3(04), pp.155-161.
Research output : Contribution to journal › Article › peer-review
Solar PV Surface Cooling Using Small Companion Solar Cell-Blowers.
Mahendran, H., Misaran, M.S.B., Rahman, M.M. and Radzali, M.A., 2021. Solar PV Surface Cooling Using Small Companion Solar Cell-Blowers. Transactions on Science and Technology, 8(3-3), pp.621-626.
Research output : Contribution to journal › Article › peer-review
Introduction to solar chimney and its applications.
Tasnim, R., Saleheen, R.U., Erin, M.T.U.R. and Mahbub, F., 2021. Introduction to solar chimney and its applications. In Cold Inflow-Free Solar Chimney: Design and Applications (pp. 39-52). Singapore: Springer Singapore.
Research output : Contribution to chapter › Chapter › peer-review
Effect of Wire Mesh Screen on the Natural Draft Chimney
Shyan, C.K., Mashud, M., Rahman, M.M. and Tamiri, F.M., 2021. Effect of Wire Mesh Screen on the Natural Draft Chimney. In Cold Inflow-Free Solar Chimney: Design and Applications (pp. 171-215). Singapore: Springer Singapore.
Research output : Contribution to chapter › Chapter › peer-review
Study the Effect of Divergent Section on Solar Chimney Performance
Jawad, A., Suffian bin Misran, M., Mashud, M. and Rahman, M.M., 2021. Study the Effect of Divergent Section on Solar Chimney Performance. In Cold Inflow-Free Solar Chimney: Design and Applications (pp. 117-138). Singapore: Springer Singapore.
Research output : Contribution to chapter › Chapter › peer-review
Introduction of Cold Inflow Free Solar Chimney
Rahman, M.M., Chu, C.M., Kumaresen, S. and Yeoh, S.L., 2021. Introduction of Cold Inflow Free Solar Chimney. In Cold Inflow-Free Solar Chimney: Design and Applications (pp. 1-11). Singapore: Springer Singapore.
Research output : Contribution to chapter › Chapter › peer-review
Numerical Analysis of Solar Chimney Design for Power Generation.
Chu, C.M., Suffian bin Misran, M., Tham, H.J. and Rahman, M.M., 2021. Numerical Analysis of Solar Chimney Design for Power Generation. In Cold Inflow-Free Solar Chimney: Design and Applications (pp. 103-115). Singapore: Springer Singapore.
Research output : Contribution to chapter › Chapter › peer-review
Technical Barriers Analysis for Solar Chimney Power Plant Exploration
Erin, M.T.U.R., Mashud, M., Tamiri, F.M. and Rahman, M.M., 2021. Technical Barriers Analysis for Solar Chimney Power Plant Exploration. In Cold Inflow-Free Solar Chimney: Design and Applications (pp. 229-242). Singapore: Springer Singapore.
Research output : Contribution to chapter › Chapter › peer-review
Economic Analysis of Solar Chimney: Literature Review.
Saleheen, R.U., Rahman, M.M., Mashud, M. and Paul, S., 2021. Economic Analysis of Solar Chimney: Literature Review. Cold Inflow-Free Solar Chimney: Design and Applications, pp.217-228.
Research output : Contribution to chapter › Chapter › peer-review
Theory of natural draft chimney and cold inflow.
Rahman, M.M., Chu, C.M. and Kumaresen, S., 2021. Theory of natural draft chimney and cold inflow. In Cold Inflow-Free Solar Chimney: Design and Applications (pp. 13-37). Singapore: Springer Singapore.
Research output : Contribution to chapter › Chapter › peer-review
Management and maintenance of textile machinery
Shamsuzzaman, M., Mashud, M., Rahman, M.M., Rahman, M.M., Hoq, E. and Das, D., 2023. Management and maintenance of textile machinery. In Advanced Technology in Textiles: Fibre to Apparel (pp. 31-63). Singapore: Springer Nature Singapore.
Research output : Contribution to chapter › Editorial › peer-review
Solar Chimney and Turbine-Assisted Ventilation System
Sung, L.L., Suffian bin Misran, M., Tarek Ur Rahman Erin, M. and Rahman, M.M., 2021. Solar Chimney and Turbine-Assisted Ventilation System. In Cold Inflow-Free Solar Chimney: Design and Applications (pp. 139-169). Singapore: Springer Singapore.
Research output : Contribution to chapter › Chapter › peer-review
Performance evaluation of a biomass cook stove with variation of chimney height and air intake system.
Erin, M.T.U.R., Rahman, M.M. and us Saleheen, R., 2021. Performance evaluation of a biomass cook stove with variation of chimney height and air intake system. Energy and Thermofluids Engineering, 1, pp.39-45.
Research output : Contribution to journal › Article › peer-review
Cold Inflow-Free Solar Chimney
Rahman, M.M., Chu, C.M. and Kumaresen, S., 2021. Cold Inflow-Free Solar Chimney. Singapore: Springer.
Research output : Contribution to book › Editorial › peer-review
Experimental investigation on the effect of divergent tower solar chimney on the theoretical power potential
Jawad, A., Misaran, M.S., Rahman, M.M. and Ismail, M.A., 2021. Experimental investigation on the effect of divergent tower solar chimney on the theoretical power potential. J Adv Res Fluid Mech Therm Sci, 81(1), pp.140-149.
Research output : Contribution to journal › Article › peer-review
Composite materials: applications in engineering, biomedicine and food science.
Siddiquee, S., Hong, M.G.J. and Rahman, M.M. eds., 2020. Composite materials: applications in engineering, biomedicine and food science. Springer Nature.
Research output : Contribution to book › Editorial › peer-review
Composite Materials for Wind Turbine Structure
Rahman, M., Hussein, M.R., Shaikat, A.S. and Tasnim, R., 2020. Composite Materials for Wind Turbine Structure. In Composite Materials: Applications in Engineering, Biomedicine and Food Science (pp. 201-212). Cham: Springer International Publishing.
Research output : Contribution to chapter › Chapter › peer-review
Biodegradability and Composite Coatings: Past, Present and Future Prospects.
Rahman, M., Paul, S. and Mahbub, F., 2020. Biodegradability and Composite Coatings: Past, Present and Future Prospects. In Composite Materials: Applications in Engineering, Biomedicine and Food Science (pp. 399-415). Cham: Springer International Publishing.
Research output : Contribution to chapter › Chapter › peer-review
Development of VFD, PLC and SCADA Based Fluid Temperature, Pressure and Level Control for Food Manufacturing Industry.
Shaikat, A.S., Rahman, M.M., Khan, M., Nouman, M.K. and Akter, S., 2019, December. Development of VFD, PLC and SCADA Based Fluid Temperature, Pressure and Level Control for Food Manufacturing Industry. In Proceedings of the 2nd International Conference on Industrial and Mechanical Engineering and Operations Management (IMEOM) (pp. 12-13).
Research output : Contribution to conference › Paper › peer-review
Analysis of evaporation data from an enclosed pond ventilated by solar chimney
Mizanur, R.M., Ashikur, R.M., Noor Ajian, M.L. and Ming chu, C., 2019, August. Analysis of evaporation data from an enclosed pond ventilated by solar chimney. In IOP Conference Series: Materials Science and Engineering (Vol. 606, No. 1, p. 012013). IOP Publishing.
Research output : Contribution to conference › Paper › peer-review
Nanotechnology: Applications in energy, drug and food
Siddiquee, S., Melvin, G.J.H. and Rahman, M.M. eds., 2019. Nanotechnology: Applications in energy, drug and food (Vol. 10, pp. 978-3). Cham, Switzerland: Springer.
Research output : Contribution to book › Editorial › peer-review
Nanotechnology in renewable energy: critical reviews for wind energy
Muzammil, W.K., Rahman, M.M., Fazlizan, A., Ismail, M.A., Phang, H.K. and Elias, M.A., 2018. Nanotechnology in renewable energy: critical reviews for wind energy. In Nanotechnology: Applications in energy, drug and food (pp. 49-71). Cham: Springer International Publishing.
Research output : Contribution to journal › Article › peer-review
Experimentally Study the Temperature Profile in the Plume Chimney above a Natural Draft Chimney Model
Rahman, M.M., 2024. Experimentally Study the Temperature Profile in the Plume Chimney above a Natural Draft Chimney Model. Journal of Engineering Advancements, 5(02), pp.51-55.
Research output : Contribution to journal › Article › peer-review
VigiTrak: Vision-Based Terrain-Adaptive Surveillance Robot with GPS Tracking.
Hoq, E., Quamruzzaman, M., Rahman, M.M. and Islam, M.S., 2025, December. VigiTrak: Vision-Based Terrain-Adaptive Surveillance Robot with GPS Tracking. In 8th IEOM Bangladesh International Conference on Industrial Engineering and Operations Management. IEOM Society.
Research output : Contribution to conference › Paper › peer-review
Performance Analysis of a Smart Compact Land Plow, Seed Sower and Water Sprinkler Agri-Machinery System.
Ahsan, Z., Biswas, S.C., Islam, S. and Rahman, M.M., Performance Analysis of a Smart Compact Land Plow, Seed Sower and Water Sprinkler Agri-Machinery System.
Research output : Contribution to conference › Paper › peer-review
Study on development of an automatic wind turbine system
Hoq, E., Mashud, M., Rahman, M.M. and Islam, M.S., 2025, November. Study on development of an automatic wind turbine system. In SciEn Conference Series: Engineering (Vol. 3, pp. 176-180).
Research output : Contribution to journal › Paper › peer-review
The development of alternative fuels and hybrid powertrains for a carbon-neutral future.
Rahman, M., Rana, M., Ahsan, Z., Sohel, M.R. and Rahman, M., 2026. The development of alternative fuels and hybrid powertrains for a carbon-neutral future. Next Energy, 12, p.100732.
Research output : Contribution to journal › Article › peer-review
An IoT Enabled Artifact Protection System for Museum Using Computer Vision.
Shaikat, A.S., Hussein, M.R., Tasnim, R., Zonayed, M., Jhara, S.S., Rahman, M.M. and Mokhter, A.H., 2024. An IoT Enabled Artifact Protection System for Museum Using Computer Vision. Journal of Engineering Advancements, 5(04), pp.123-131.
Research output : Contribution to journal › Article › peer-review
Gamma irradiation-induced modifications in E-glass fiber reinforced polypropylene composites: A structural and performance analysis
Shahida, S., Rahman, M.M., Hoque, M.B., Rahman, M.M., Baria, B., Hasan, T. and Khan, R.A., 2024. Gamma irradiation-induced modifications in E-glass fiber reinforced polypropylene composites: A structural and performance analysis. Journal of Engineering Advancements, 5(4), pp.132-137.
Research output : Contribution to journal › Article › peer-review
Implementing an IoT Dashboard to Control Boiling and Cooling Systems in Manufacturing Industries.
Rahman, M., Rahman, M.M., Rana, M., Ahsan, Z. and Sohel, M.R., 2024. Implementing an IoT Dashboard to Control Boiling and Cooling Systems in Manufacturing Industries.
Research output : Contribution to conference › Paper › peer-review
Development of a Wiper and Sweeper Robot
Rahman, M.M., Mashud, M., Hoq, E. and Islam, M.S., 2024, December. Development of a Wiper and Sweeper Robot. In 7th IEOM Bangladesh International Conference on Industrial Engineering and Operations Management. IEOM Society.
Research output : Contribution to conference › Paper › peer-review
Optimizing Manufacturing Processes and Production through the Strategic Use of additional Cutting Tools in Injection Molding Machine.
Ahsan, Z., Rahman, M., Rana, M., Sohel, M.R. and Rahman, M.M., 2024, December. Optimizing Manufacturing Processes and Production through the Strategic Use of additional Cutting Tools in Injection Molding Machine. In 7th IEOM Bangladesh International Conference on Industrial Engineering and Operations Management. IEOM Society.
Research output : Contribution to conference › Paper › peer-review
Evaluate Performance of Earth – Air – Pipe System under Laboratory Condition
Rahman, M. 2016, March. Evaluate Performance of Earth – Air – Pipe System under Laboratory Condition. In 6th Annual International Conference on Industrial Engineering and Operations Management, .
Research output : Contribution to conference › Paper › peer-review
Design of an Bluetooth Controlled Food Delivery Waiter Robot for Restaurants
Madha, J., Nawar, A., Hasan, M., and Mizanur, M., 2022, December. Design of an Bluetooth Controlled Food Delivery Waiter Robot for Restaurants. In 5th International Conference in Industrial and Mechanical Engineering and Operations Management (IMEOM),
Research output : Contribution to conference › Abstract › peer-review
Building an Industrial Autonomous Line-Following Robot through the Design and Construction Processes
Hasan, M., Mizanur, m., shahria, s., and Ullah, M., 2022, December. Building an Industrial Autonomous Line-Following Robot through the Design and Construction Processes. In 5th International Conference in Industrial and Mechanical Engineering and Operations Management (IMEOM)
Research output : Contribution to conference › Paper › peer-review
Performance Evaluation of a Solar Chimney at the Presence of Cold Inflow
Mizanur, m., Mahbub, F., and Mashud , M., 2023, June. Performance Evaluation of a Solar Chimney at the Presence of Cold Inflow. In 8th North America Conference on Industrial Engineering and Operations Management ,
Research output : Contribution to conference › Abstract › peer-review
Automotive Aerodynamic Drag and Lift Analysis using Computational Fluid Dynamics Software : A Review.
Madha, J., Nawar, A., and Rahman, M., 2023, November. Automotive Aerodynamic Drag and Lift Analysis using Computational Fluid Dynamics Software : A Review. In 3rd Indian International Conference on Industrial Engineering and Operations Management,
Research output : Contribution to conference › Paper › peer-review
Study the Effect of Wire Mesh Screen on Solar Chimney Assisted Natural Ventilation System
Rahman, M., Tasnim, R., Salehen, R., Akbar, N., Mashud, M., and Bishal, S., 2023, December. Study the Effect of Wire Mesh Screen on Solar Chimney Assisted Natural Ventilation System. In 6th Industrial Engineering and Operations Management Bangladesh Conference,
Research output : Contribution to conference › Paper › peer-review
Examine How a Turbine Ventilator Affects Chimney Performance.
Rahman, M., Hoq, M., Saagoto, M., Mahbub, F., Barua, P., and Mashud, M., 2023, December. Examine How a Turbine Ventilator Affects Chimney Performance. In 6th Industrial Engineering and Operations Management Bangladesh Conference,
Research output : Contribution to conference › Paper › peer-review
Investigate how inlet geometry affects vortex power
Rahman, M.M., Rahman, M., Rana, M., Farhan, A., Sohel, M.R. and Mashud, M., 2023, December. Investigate how inlet geometry affects vortex power. In 6th Industrial Engineering and Operations Management Bangladesh Conference(pp. 721-729). IEOM Society Organisation. https://doi. org/10.46254/BA06 (Vol. 20230127).
Research output : Contribution to conference › Paper › peer-review
Study on the Aerodynamic Effects of SD7032 Aerofoil as Adjustable Front Wings of a Formula Student Car.
Madha, J., Nawar, A., Rahman, M., and Akbar, N., 2024, July. Study on the Aerodynamic Effects of SD7032 Aerofoil as Adjustable Front Wings of a Formula Student Car. In 7th European Industrial Engineering and Operations Management Conference,
Research output : Contribution to conference › Paper › peer-review
Introduction to Mechatronics. In Mechatronics: Fundamentals and Applications
Farhan, A., Barua, P., Saleheen, R. U., Tasnim, R., Rahman, M. M., & Rahman, M. (2024). Introduction to Mechatronics. In Mechatronics: Fundamentals and Applications (pp. 1-19). Singapore: Springer Nature Singapore.
Research output : Contribution to chapter › Editorial › peer-review
Conclusion and Future Trends of Mechatronics
Rahman, M., Rahman, M.M., Sohel, M.R., Farhan, A., Huq, E. and Mahbub, F., 2024. Conclusion and future trends of mechatronics. In Mechatronics: Fundamentals and Applications (pp. 209-224). Singapore: Springer Nature Singapore.
Research output : Contribution to chapter › Editorial › peer-review
Mechatronics: Fundamentals and Applications
Rahman, M.M., Mahbub, F., Tasnim, R. and Saleheen, R.U. eds., 2024. Mechatronics: Fundamentals and Applications. Springer Nature.
Research output : Contribution to book › Editorial › peer-review
An Overview of Solar Power Growth in Bangladesh: Technologies, Policy Frameworks, and Market Trends
Hoq, E., Islam, M.S., Rahman, M.M., Rahman, B.A. and Merda, M.R., 2025, December. An Overview of Solar Power Growth in Bangladesh: Technologies, Policy Frameworks, and Market Trends. In 8th IEOM Bangladesh International Conference on Industrial Engineering and Operations Management. IEOM Society.
Research output : Contribution to conference › Paper › peer-review
Advanced Technology in Textiles - Fiber to Apparel (2023), Publisher: Springer Nature
Rahman, M.M., Mashud, M. and Rahman, M.M. eds., 2023. Advanced technology in textiles: fibre to apparel. Springer Nature.
Research output : Contribution to book › Editorial › peer-review
Masud Rana
Assistant Professor
Mustafizur Rahman, Md. Mizanur Rahman, Masud Rana, Zahid Ahsan and M.R. Sohel, "Implementing on IoT dashboard to control boiling and cooling systems in manufacturing industries", 7th IEOM Bangladesh Conference, 2024. https://doi.org/10.46254/BA07.20240017
Research output : Contribution to conference › Article › peer-review
Zahid Ahsan, Mustafizur Rahman, Masud Rana, M.R. Sohel and Md. Mizanur Rahman, "Optimizing Manufacturing Processes and Production through the Strategic Use of Additional Cutting Tools in Injection Molding Machine", 7th IEOM Bangladesh Conference, 2024. https://doi.org/10.46254/BA07.20240028
Research output : Contribution to conference › Article › peer-review
The development of alternative fuels and hybrid powertrains for a carbonneutral future. Mustafizur Rahman, Masud Rana, Zahid Ahsan, M.R. Sohel, Mizanur Rahman, Next Energy, Volume 12, 2026, 100732, ISSN 2949-821X,https://doi.org/10.1016/j.nxener.2026.100732
Research output : Contribution to journal › Article › peer-review
Masud Rana, Md. Emran Hossain, Md. Kabbir Hossain, and Arafat A. Bhuiyan “3D numerical analysis of the effect of various geometric parameters of EATHEs under steady condition” AIP Conference Proceedings 2121, 040009 (2019); https://doi.org/10.1063/1.5115880
Research output : Contribution to conference › Article › peer-review
Asrafusjaman,M.K. Kabir ,Masud Rana,Ariful Islam,Md. Shawkut Ali khan “Characterization of textured and diffused Monocrystalline Silicon wafer” European Scientific Journal, https://doi.org/10.19044/esj.2021.v17n17p125
Research output : Contribution to journal › Article › peer-review
Masud Rana, Mashrur Muntasir Nuhash, Arafat A. Bhuiyan, A CFD modelling for optimizing geometry parameters for improved performance using clean energy geothermal ground-to-air tunnel heat exchangers, Case Studies in Thermal Engineering, https://doi.org/10.1016/j.csite.2023.103867
Research output : Contribution to journal › Article › peer-review
Rahman, M., Mashud, M., Rana, M., Rana, M., Farhan, A., & Rahman, M. (2023, December). Investigate How Inlet Geometry Affects Vortex Power. In 6th Industrial Engineering and Operations Management Bangladesh Conference, https://doi.org/10.46254/BA06.20230127.
Research output : Contribution to conference › Article › peer-review
Mobarak, M.H., Hasan, M.J., Rahman, M., Rana, M., Saikat, A.S., Tasnim, R. (2024). Ethical and Social Consideration in Mechatronics. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore. https://doi.org/10.1007/978-981-97-7117-2_8
Research output : Contribution to book › Article › peer-review
Md. Aminul Islam, Zahid Ahsan, Mustafizur Rahman, Md. Abdullah, Masud Rana, Nayem Hossain, Mohammad Assaduzzaman Chowdhury, Machine learning in advancing anode materials for Lithium-Ion batteries – A review, Inorganic Chemistry Communications, 2024,113577,ISSN 1387-7003, https://doi.org/10.1016/j.inoche.2024.113577
Research output : Contribution to journal › Article › peer-review
Islam, M. A., Hossain, N., Ahsan, Z., Rana, M., Rahman, M., & Abdullah, M. (2025). DFT Insights into the Mechanical Properties of NMs. Results in Surfaces and Interfaces, 100417. https://doi.org/10.1016/j.rsurfi.2025.100417
Research output : Contribution to journal › Article › peer-review
Md. Sohel Rana
Assistant Professor
S.S. Khaleduzzaman, R. Saidur, J. Selvaraj, I.M. Mahbubul, M.R. Sohel, I.M. Shahrul, Nanofluids for Thermal Performance Improvement in Cooling of Electronic Device. International Conference on Nano-Scitech 2013, Advanced Materials Research, 832 (2014) 218-223.
Research output : Contribution to conference › Article › peer-review
The development of alternative fuels and hybrid powertrains for a carbonneutral future. Mustafizur Rahman, Masud Rana, Zahid Ahsan, M.R. Sohel, Mizanur Rahman, Next Energy, Volume 12, 2026, 100732, ISSN 2949-821X,https://doi.org/10.1016/j.nxener.2026.100732
Research output : Contribution to journal › Article › peer-review
S.S. Khaleduzzaman, M.R. Sohel, R. Saidur, I.M. Mahbubul, I.M. Shahrul, B.A. Akash, J. Selvaraj, Energy and exergy analysis of alumina-water nanofluid for an electronic liquid cooling system. International Communications in Heat and Mass Transfer, 57 (2014) 118-127.
Research output : Contribution to journal
M. Rahman, M.M. Rahman, M.R. Sohel, A. Farhan, E. Huq, F. Mahbub, (2024). Conclusion and Future Trends of Mechatronics. In: M.M. Rahman, F. Mahbub, R. Tasnim, R.U. Saleheen, (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore.
Research output : Contribution to book › Article › peer-review
Md. Mizanur Rahman, Mustafizur Rahman, Masud Rana, Ahmed Farhan, M.R. Sohel, and Mohammad Mashud, Investigate How Inlet Geometry Affects Vortex Power. Proceedings of the 6th Industrial Engineering and Operations Management Bangladesh Conference Dhaka, Bangladesh, IEOM Society International, December 26-28, 2023.
Research output : Contribution to conference › Article › peer-review
S.S. Khaleduzzaman, I.M. Mahbubul, M.R. Sohel, R. Saidur, J. Selvaraj, T.A. Ward, M.E. Niza, Experimental analysis of energy and friction factor for titanium dioxide nanofluid in a water block heat sink. International Journal of Heat and Mass Transfer, 115 (2017) 77–85.
Research output : Contribution to journal
S.S. Khaleduzzaman, M.R. Sohel, I.M. Mahbubul, R. Saidur, J. Selvaraj, Exergy and entropy generation analysis of TiO2–water nanofluid flow through the water block as an electronics device. International Journal of Heat and Mass Transfer, 101 (2016) 104–111.
Research output : Contribution to journal
M.R. Sohel, R. Saidur, S.S. Khaleduzzaman and T.A. Ibrahim, Cooling performance investigation of electronics cooling system using Al2O3–H2O nanofluid. International Communications in Heat and Mass Transfer, 65 (2015) 89–93.
Research output : Contribution to journal
M.R. Sohel, S.S. Khaleduzzaman, R. Saidur, A. Hepbasli and M. F. M. Sabri, An experimental investigation of heat transfer enhancement of a minichannel heat sink using Al2O3-H2O nanofluid. International Journal of Heat and Mass Transfer, 74 (2014) 164–172.
Research output : Contribution to journal
M.M. Elias, I.M. Mahbubul, R. Saidur, M.R. Sohel, I.M. Shahrul, S.S. Khaleduzzaman, S. Sadeghipour, Experimental investigation on the thermo-physical properties of Al2O3 nanoparticles suspended in car radiator coolant. International Communications in Heat and Mass Transfer, 54 (2014) 48-53.
Research output : Contribution to journal
S.S. Khaleduzzaman, R. Saidur, I.M. Mahbubul, T.A. Ward, M.R. Sohel, I.M. Shahrul, J. Selvaraj, M.M. Rahman, Energy, Exergy and Friction Factor Analysis of Nanofluid as a Coolant for Electronics. Industrial & Engineering Chemistry Research, 53 (2014) 10512-10518.
Research output : Contribution to journal
M.R. Sohel, R. Saidur, M.F.M. Sabri, M. Kamalisarvestani, M.M. Elias and A. Ijam, Investigating the heat transfer performance and thermophysical properties of nanofluids in a circular micro-channel. International Communications in Heat and Mass Transfer, 42 (2013) 75-81.
Research output : Contribution to journal
M.R. Sohel, R. Saidur, N.H. Hassan, M.M. Elias, S.S. Khaleduzzaman and I.M. Mahbubul, Analysis of entropy generation using nanofluid flow through the circular microchannel and minichannel heat sink. International Communications in Heat and Mass Transfer, 46 (2013) 85-91.
Research output : Contribution to journal
M.M. Elias, M. Miqdad, I.M. Mahbubul, R. Saidur, M. Kamalisarvestani, M.R. Sohel, A. Hepbasli, N.A. Rahim and M.A. Amalina, Effect of nanoparticle shape on the heat transfer and thermodynamic performance of a shell and tube heat exchanger. International Communications in Heat and Mass Transfer, 44 (2013) 93-99.
Research output : Contribution to journal
F.S. Javadi, S. Sadeghipour, R. Saidur, G. BoroumandJazi, B. Rahmati, M.M. Elias and M.R. Sohel, The effects of nanofluid on thermophysical properties and heat transfer characteristics of a plate heat exchanger. International Communications in Heat and Mass Transfer, 44 (2013) 58-63.
Research output : Contribution to journal
S.S. Khaleduzzaman, M.R. Sohel, R. Saidur, J. Selvaraj, Stability of Al2O3-water Nanofluid for Electronics Cooling System. 6th BSME International Conference on Thermal Engineering (ICTE 2014), Procedia Engineering, 105 (2015) 406-411.
Research output : Contribution to conference
S.S. Khaleduzzaman, M.R. Sohel, R. Saidur, J. Selvaraj, Convective performance of 0.1 % volume fraction of TiO2/water nanofluid in an electronic heat sink. 6th BSME International Conference on Thermal Engineering (ICTE 2014), Procedia Engineering, 105 (2015) 412-417.
Research output : Contribution to conference
Mustafizur Rahman, Md. Mizanur Rahman, Masud Rana, Zahid Ahsan and M.R. Sohel, "Implementing on IoT dashboard to control boiling and cooling systems in manufacturing industries", 7th IEOM Bangladesh Conference, 2024.
Research output : Contribution to conference › Article › peer-review
Zahid Ahsan, Mustafizur Rahman, Masud Rana, M.R. Sohel and Md. Mizanur Rahman, "Optimizing Manufacturing Processes and Production through the Strategic Use of Additional Cutting Tools in Injection Molding Machine", 7th IEOM Bangladesh Conference, 2024.
Research output : Contribution to conference › Article › peer-review
M.M. Elias, R. Saidur, N.A. Rahim, M.R. Sohel, I.M. Mahbubul, Performance Investigation of a Plate Heat Exchanger Using Nanofluid with Different Chevron Angle. International Conference on Nano-SciTech 2013, Advanced Materials Research, 832 (2014) 254-259.
Research output : Contribution to conference
M.R. Sohel, R. Saidur, M.F.M. Sabri, M.M. Elias, S.S. Khaleduzzaman, Investigation of Heat Transfer Performances of Nanofluids Flow through a Circular Minichannel Heat Sink for Cooling of Electronics. International Conference on Nano-Scitech 2013, Advanced Materials Research, 832 (2014) 166-171.
Research output : Contribution to conference
Dr. Nahiyan Al-Azad
Assistant Professor
Techno-economic assessment and optimization of hybrid renewable energy systems for island electrification: Case studies of Perhentian and Tioman Islands, Malaysia
Research output : Contribution to journal › Article › peer-review
Modelling and assessment of renewable energy systems for decarbonization in Perhentian and Tioman Islands
Research output : Contribution to journal › Article › peer-review
Democratic Leadership Among Department Heads in Sabah, Malaysia: A Quantitative Study on Lecturers’ Perceptions.
Research output : Contribution to journal › Article › peer-review
Visionary leadership among department heads: A quantitative study on academics’ perceptions in Sabah, Malaysi
Research output : Contribution to journal › Article › peer-review
Instructional Leadership Among Principals in Sabah, Malaysia: A Quantitative Study on Teachers’ Perceptions
Research output : Contribution to journal › Article › peer-review
Relationship between Teachers’ Perceived Cruciality of Digital Leadership among Principals and Their Wellbeing in Sabah, Malaysia
Research output : Contribution to journal › Article › peer-review
Finite Element Analysis of Magnetic Flux Leakage Detection: Characterizing Defect Size And Depth Effects
Research output : Contribution to journal › Article › peer-review
A Mini Review of Renewable Energy Strategies for Pulau Perhentian Net Zero Journey
Research output : Contribution to journal › Article › peer-review
Servant, Democratic, and Transformational Leadership Styles: Implications on Higher Educational Institutions (HEIs) in Malaysia
Research output : Contribution to journal › Article › peer-review
Defect Recognition Method for Magnetic Leakage Detection in Steel Pipes Based on Improved Neural Networks
Research output : Contribution to journal › Article › peer-review
Defect Recognition Method for Magnetic Leakage Detection in Oil and Gas Steel Pipes Based on Improved Neural Networks
Research output : Contribution to journal › Article › peer-review
Assessment of Flexural Strength and Fractography Analysis of Honeycomb Sandwiched Material Reinforced with Natural Fibres for Construction Industry Applications
Research output : Contribution to journal › Article › peer-review
A Mini Review on Natural Fiber Honeycomb (NFH) Sandwiched Structure Composite: Flexural Perfomance Perspective
Research output : Contribution to journal › Article › peer-review
A Mini Review on Testing Methods for Mechanical Properties of Natural Fibre Honeycomb Sandwich Structure and Fractography Analysis
Research output : Contribution to journal › Article › peer-review
A Review on Development of Natural Fibre Composites for Construction Applications
Research output : Contribution to journal › Article › peer-review
Modelling of Green Energy System in Pulau Perhentian
Research output : Contribution to conference › Paper › peer-review
Investigation of specific energy absorption of natural fiber honeycomb sandwich structure composite as building construction material application
Research output : Contribution to conference › Paper › peer-review
Influencing factors in extension of time claims
Research output : Contribution to conference › Article › peer-review
Microgrid Development and Optimization
ISBN: 978-967-2426-55-4
Research output : Contribution to book › Editorial › not peer-review
Advancements in Natural Fibre Composites for industrial Applications
EISBN: 978-967-2426-46-2
Research output : Contribution to book › Editorial › not peer-review
Flexural Performance of Natural Fiber Honeycomb (NFH) Sandwiched Structure Composite for Construction Industry Application
Research output : Contribution to chapter › Chapter › peer-review
Failure Analysis Of Natural Fibre Honeycomb Composite Sandwich Panel
Research output : Contribution to chapter › Chapter › peer-review
Effect Of Water Absorption On Natural Fiber Honeycomb Composite Sandwiched Panel for Construction Material Application
Research output : Contribution to chapter › Chapter › peer-review
An IoT-Based Health Monitoring System with Real-Time Location Identification for Emergency Response
Research output : Contribution to conference › Paper › peer-review
Research output : Contribution to journal › Article › peer-review
Mahmudul Firoz
Sr. Lecturer
Integrated assessment of waste-to-energy valorization in Sarawak: harnessing biofuel adoption for sustainability
Kashem, S. B. A., Firoz, M., Wahir Ali, M., & Bhuiyan, A. A. (2026). Integrated assessment of waste-to-energy valorization in Sarawak: harnessing biofuel adoption for sustainability. Biofuels, 1–26.
Research output : Contribution to journal › Article › peer-review
Coal combustion and clean utilisation technologies in Bangladesh – environmental impacts and international perspectives
Firoz, M. et al. (2026) ‘Coal combustion and clean utilisation technologies in Bangladesh – environmental impacts and international perspectives’, International Journal of Ambient Energy, 47(1). doi: 10.1080/01430750.2026.2695411.
Research output : Contribution to journal › Article › peer-review
Voice Augmented Ultrasonic Vibration driven fluidity improvement in sand Casting process
M. A. U. Patwari, S. A. Bhuiyan, R. A. Nipun, R. S. Nijhum and M. Firoz, "Voice Augmented Ultrasonic Vibration driven fluidity improvement in sand Casting process," 2026 International Conference on Frontiers of Engineering and Emerging Technologies (FET), Sakhir, Bahrain, 2026, pp. 1-7, doi: 10.1109/FET68771.2026.11601488
Research output : Contribution to journal › Article › peer-review
Investigation of Coal Firing Characteristics Using Oxy-Fuel Technologies in a 125 MW Power Plant
Research output : Contribution to conference › Article › peer-review
Investigation of Co-firing Characteristics Using Oxy-fuel Technologies in a 125 MW Power Plant
Mahmudul Firoz “Investigation of Co-firing Characteristics Using Oxy-fuel Technologies in a 125 MW Power Plant”,(15th ICME2025), (2025, December 17–18).
Research output : Contribution to conference › Article › peer-review
Introduction of Eco Scrubbing Technology for Controlling Emissions [Conference presentation abstract
Mahmudul Firoz, Md. Jahid Hassan, Md. Rezwanul Karim, Arafat Ahmed Bhuiyan (2022, September 02–04). Introduction of Eco Scrubbing Technology for Controlling Emissions [Conference presentation abstract]. International Conference on Environmental protection for Sustainable Development (ICEPSD-2022).
Research output : Contribution to conference › Article › peer-review
Utilizing Green Building Technology in the Creation of an Efficient, Sustainable Heating, Ventilation, and Air Conditioning System (HVAC)
Mahmudul Firoz” Utilizing Green Building Technology in the Creation of an Efficient, Sustainable Heating, Ventilation, and Air Conditioning System (HVAC)” ICMMPE2026 DUET https://icmmpeduet.com/
Research output : Contribution to conference › Article › peer-review
Numerical Analysis of Coal-Biomass Co-combustion and Associated Emissions Characteristics of Coal-fired Thermal Power Plants in Bangladesh
Mahmudul Firoz, Md. Rezwanul Karim, Arafat Ahmed Bhuiyan (2022, November 03–04). “Numerical Analysis of Coal-Biomass Co-combustion and Associated Emissions Characteristics of Coal-fired Thermal Power Plants in Bangladesh” [Conference Presentation, Abstract]. International Conference on 4IR for Emerging Future(4iref-`2022). https://www.scribd.com/document/619735973/All-Proceedings-4iref-2022-Bangladesh
Research output : Contribution to conference › Article › peer-review
Numerical Analysis of Extended Annular Jet Impingement for Sustainable Solar Air Heater
Mahmudul Firoz, M. M. Nuhash, M. R. Karim, A. A. Bhuiyan (2023, December 18–19). “Numerical Analysis of Extended Annular Jet Impingement for Sustainable Solar Air Heater”,(14th ICME2023). https://dx.doi.org/10.2139/ssrn.4858854
Research output : Contribution to journal › Article › peer-review
Life Cycle Assessment of Biofuel Production from Household Waste and the Sustainability of the Processes: A Comprehensive Review
Mahmudul Firoz “Life Cycle Assessment of Biofuel Production from Household Waste and the Sustainability of the Processes: A Comprehensive Review” http://dx.doi.org/10.2139/ssrn.4615065
Research output : Contribution to journal › Article › peer-review
Antiviral Effects Of Bacteriocin Against Animal-To-Human Transmittable Mutated Sars-Cov-2: A Systematic Review
Mahmudul Firoz, (“Antiviral Effects Of Bacteriocin Against Animal-To-Human Transmittable Mutated Sars-Cov-2: A Systematic Review,” 2021) hhttps://journal.hep.com.cn/fase/EN/10.15302/J-FASE-2021397 (Q1)
Research output : Contribution to journal › Article › peer-review
CFD modelling of varying load-influenced NOx, SOx emissions and combustion kinetics in a sub-critical coal-fired furnace
Mahmudul Firoz, M. R. Karim, A. A. Bhuiyan, “CFD modelling of varying load-influenced NOx, SOx emissions and combustion kinetics in a sub-critical coal-fired furnace”, Fuel, Elsevier, Volume 406, Part C, 2026, 136966, ISSN 0016-2361, https://doi.org/10.1016/j.fuel.2025.136966 (Q1)
Research output : Contribution to journal › Article › peer-review
Khairun Nasrin Rimi
Lecturer
Enhancing formula student car performance: Nose shape optimization via adjoint method
Research output : Contribution to journal › Article › peer-review
Optimizing Aerodynamic Performance of Selig S3014 Airfoil through Dimensional Parametric Analysis
Research output : Contribution to conference
Magnetic nanoparticles: Synthesis, characterization and applications
Research output : Contribution to book
Experimental characterization and adjoint optimization of side-view mirror geometry for aerodynamic drag reduction
Rahman, M.S. et al. (2026b) 'Experimental characterization and adjoint optimization of side-view mirror geometry for aerodynamic drag reduction,' Discover Vehicles, 2(1). https://doi.org/10.1007/s44465-026-00029-w.
Research output : Contribution to journal › Article › peer-review
Biobased composites for advanced applications: Possibilities and difficulties on the path to circularity
Research output : Contribution to book
Advanced Numerical Study on Natural Convection Heat Transfer in an Inverted T-Shaped Cavity Filled with Copper Nanofluid
Research output : Contribution to conference › Article › peer-review
Enhancement of Aerodynamic Performance of NACA 4415 2D by Adjoint Optimization and Vortex Generators using CFD Analysis
Research output : Contribution to conference › Article › peer-review
Md Shariful Islam
Lecturer
Advances and Significance of Nanowires in Semiconductor Applications
Research output : Contribution to journal › Article › peer-review
Development of a wiper and sweeper robot
Research output : Contribution to conference
Study on Development of an Automatic Wind Turbine System
Research output : Contribution to conference › Paper › peer-review
Modify, Testing and Analysis of a Vertical Axis Wind Turbine for Low Wind Speed
Research output : Contribution to journal › Paper › peer-review
VigiTrak: Vision-Based Terrain-Adaptive Surveillance Robot with GPS Tracking
Research output : Contribution to conference › Paper › peer-review
Development of an Accelerometer-Based Hand Gesture-Controlled Robotic Vehicle
Research output : Contribution to conference › Paper › peer-review
An Overview of Solar Power Growth in Bangladesh: Technologies, Policy Frameworks, and Market Trends
Research output : Contribution to conference › Paper › peer-review
Vertical Axis Wind Turbine Technologies: A review for Design, Performance, and Research Challenges
Research output : Contribution to journal › Review › peer-review
Yusuf Ali
Lecturer
Fuel properties, Performance and emission analysis of a petrol engine using plastic pyrolysis oil.
Research output : Contribution to conference › Abstract › not peer-review
Advances in additive manufacturing for medical robotics: A review
Research output : Contribution to journal › Review › peer-review
Ceramic coating on Mg alloy for enhanced degradation resistance as implant materials
Research output : Contribution to journal › Paper › peer-review
Synthesis and characterization of biocompatible hybrid coating on WE54 Mg alloy for implant applications
Research output : Contribution to journal › Paper › peer-review
Physical and electrochemical performances of novel tellurium composite films as anode applications in energy storage systems
Research output : Contribution to journal › Paper › peer-review
Enhancing Mechanical and Surface Properties of 3D-Printed Kevlar- Reinforced ABS/PLA Composites through FDM Process
Research output : Contribution to journal › Paper › peer-review
Thermomechanical and degradation behaviour of low proportion graphene oxide-reinforced PLA/HA composites for biomedical applications
Research output : Contribution to journal › Article › peer-review
Preparation of Bioactive Polymer Composite Films on ZK41 Magnesium Alloy Surface
Research output : Contribution to conference › Article › not peer-review
Md. Bayazid Ahmed
Lecturer
Hydrodynamic Cavitation-Assisted Hydrothermal Separation: A Pathway for Valorizing Lignocellulosic Biomass into Biopolymers and Extractives
Ahmed, M.B. and Rudra, S., 2025. Hydrodynamic cavitation-assisted hydrothermal separation: A pathway for valorizing lignocellulosic biomass into biopolymers and extractives. Processes, 13, p.2041.
Research output : Contribution to journal › Article › peer-review
Meghdeepa Choudhury
Lecturer
Pre-renovation considerations for a Swedish single family house: Analysis of energy saving potential.
Research output : Contribution to conference
Zayeed Bin Mamun
Lecturer
Towards chemical source tracking and characterization using physics-informed neural networks
Naderi, F., Perez-Raya, I., Yadav, S., Kalajahi, A. P., Mamun, Z. B., & D’Souza, R. M. (2024). Towards Chemical Source Tracking and characterization using physics-informed Neural Networks. Atmospheric Environment, 334, 120679. https://doi.org/10.1016/j.atmosenv.2024.120679
Research output : Contribution to journal › Article › peer-review
Input parameterized physics informed neural networks for de noising, super-resolution, and imaging artifact mitigation in time resolved three dimensional phase-contrast magnetic resonance imaging
Pashaei Kalajahi, A., Csala, H., Naderi, F., Mamun, Z., Yadav, S., Amili, O., Arzani, A., & D’Souza, R. (2024). Input parameterized physics informed neural network for advanced 4D flow MRI processing. Engineering Applications of Artificial Intelligence, 150. 110600. https://doi.org/10.2139/ssrn.4700974
Research output : Contribution to journal › Article › peer-review